A - 2 Symbol LS4278 Product Reference Guide
Remote Address (All Bluetooth Host Modes) No Address
4-26
Authentication Disable
4-25
Encryption Disable
4-27
User Preferences
Beeper Tone Medium
5-4
Beeper Volume High
5-4
Beep on Insertion Enabled
5-5
Intellistand Idle Timeout 15 min
5-5
Power Mode Reduced Power Mode
5-7
Time Delay to Reduced Power Mode 1 sec
5-8
Scan Pattern Multi-line Always Raster
5-9
Scan Line Width Full Width
5-10
Laser On Time 3.0 sec
5-10
Beep After Good Decode Enable
5-11
Transmit Code ID Character None
5-12
Prefix Value 7013 <CR><LF>
5-13
Suffix Value 7013 <CR><LF>
5-13
Scan Data Transmission Format Data As Is
5-13
FN1 Substitution Values Set
5-15
Transmit “No Read” Message Disable
5-15
Synapse Interface Standard
5-16
Batch Mode Normal (Do Not Batch Data)
5-17
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM PC/AT& IBM PC
Compatibles
1
6-4
Country Types (Country Codes) North American
6-5
Ignore Unknown Characters Send
6-6
Keystroke Delay No Delay
6-7
Table A-1
Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
