Standard Default Parameters A - 3
Intra-Keystroke Delay Disable
6-7
Alternate Numeric Keypad Emulation Disable
6-8
Caps Lock On Disable
6-8
Caps Lock Override Disable
6-9
Convert Wedge Data No Convert
6-9
Function Key Mapping Disable
6-10
FN1 Substitution Disable
6-10
Send and Make Break Send
6-11
RS-232 Host Parameters
RS-232 Host Types Standard
7-6
Baud Rate 9600
7-7
Parity Type None
7-8
Stop Bit Select 1 Stop Bit
7-9
Data Bits (ASCII Format) 8-Bit
7-9
Check Receive Errors Enable
7-10
Hardware Handshaking None
7-10
Software Handshaking None
7-12
Host Serial Response Time-out 2 sec
7-14
RTS Line State Low RTS
7-15
Beep on <BEL> Disable
7-15
Intercharacter Delay 0 msec
7-16
Nixdorf Beep/LED Options Normal Operation
7-17
Ignore Unknown Characters Send Bar Code
7-17
USB Host Parameters
USB Device Type HID Keyboard Emulation
8-4
USB Country Keyboard Types (Country Codes) North American
8-5
USB Keystroke Delay No Delay
8-7
USB CAPS Lock Override Disable
8-7
Table A-1
Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.