32 January 31, 2006 6809497A15-A
Disassembly V3x
Removing and Replacing the Flip Cover
1. Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, keypad assembly and flip assembly as described in the
procedures.
2. Use the metal tweezers to remove the 2 flip screw covers at the top of the flip
assembly (see Figure 16).
3. Use a T 5 b it to rem ove 2 fl ip screws at the top of the flip as semb ly located un de r
the screw covers. Set the screws aside for reuse unless they are damaged.
051246o
Figure 16. Removing the Flip Cover Screws
Flip screw covers
To Next Page
Loading...
