Motorola XPR 3300 - Attaching the Universal Connector Cover (Dust Cover); Attaching the Accessory Connector

Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna
side of the radio. It is used to connect MOTOTRBO
accessories to the radio. Follow the procedure to
attach the dust cover to your radio.
Replace the dust cover when the universal connector
is not in use.
1 Insert the slanted end of the cover into the slots
above the universal connector.
2 Press downwards on the cover to seat the dust
cover properly on the universal connector.
1
2
3
3 Secure the dust cover to the radio by pushing the
latch upwards.
Attaching the Accessory Connector
The accessory connector is to be secured to the
universal connector on the antenna side of the radio.
Follow the procedure to attach the accessory
connector to your radio.
1 Insert the slanted end into the slots above the
universal connector.
2 Push connector upward.
3 Press downwards on the accessory connector
until you hear a click.
1
2
3
Basic Operations
15
English