microphone on the VOX-capable accessory detects
voice.
Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
You can enable or disable VOX by doing one of the
following:
• Press the PTT button during radio operation to
disable VOX.
• Turn the radio off and then power it on again to
enable VOX.
• Change the channel via the Channel Selector
knob to enable VOX.
• Turn VOX on or off via the programmed VOX
button.
If the Talk Permit Tone is enabled, use a trigger word
to initiate the call. Wait for the Talk Permit Tone to
finish before speaking clearly into the microphone.
See for more information.
Note:
Turning this feature on or off is limited to
radios with this function enabled. Check with
your dealer or system administrator for more
information.
Turning Voice Operating Transmission On or Off
Follow the procedure to turn Voice Operating
Transmission (VOX) on or off on your radio.
Press the programmed VOX button to toggle the
feature on or off.
Turning Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts,
if needed, except for incoming Emergency alert tone.
Follow the procedure to turn tones and alerts on or off
on your radio.
Press the programmed All Tones/Alerts button.
One of the following tone sounds:
Positive Indicator
Tone
All tones and alerts are
turned on.
Negative Indicator
Tone
All tones and alerts are
turned off.
Turning Intelligent Audio On or Off
Your radio automatically adjusts the audio volume to
overcome current background noise in the
50
English
To Next Page
Loading...
