Making All Calls
Your radio must be programmed for you to make an
All Call. Follow the procedure to make All Calls on
your radio.
1 Select a channel with the active All Call group
alias or ID.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
Users on the channel cannot respond to an All
Call.
Selective Calls
A Selective Call is a call from an individual radio to
another individual radio. It is a Private Call on an
analog system.
Responding to Selective Calls
Follow the procedure to respond to Selective Calls on
your radio.
When you receive a Selective Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.A tone sounds.
Making Selective Calls
Your radio must be programmed for you to initiate a
Selective Call. Follow the procedure to make
Selective Calls on your radio.
1 Select a channel with the active subscriber alias or
ID.
31
English
To Next Page
Loading...
