The radio exits the Emergency mode, and
reinitiates Emergency, if Emergency Alarm is
enabled on the new channel.
• Press the programmed Emergency On button
during an Emergency initiation or transmission
state.
The radio exits this state, and reinitiates
Emergency.
Exiting Emergency Mode After Sending the Emergency
Alarm
This feature is only applicable to the radio sending
the Emergency Alarm.
Your radio exits Emergency mode when:
• An acknowledgment is received (for Emergency
Alarm only).
• All retries to send the alarm have been exhausted.
• Your radio is turned off.
Note:
Your radio does not reinitiate the
Emergency mode automatically when it is
powered up again.
Follow the procedure to exit Emergency mode on
your radio.
Press the programmed Emergency Off button.
Privacy
This feature helps to prevent eavesdropping by
unauthorized users on a channel by the use of a
software-based scrambling solution. The signaling
and user identification portions of a transmission are
not scrambled.
Your radio must have privacy enabled on the channel
to send a privacy-enabled transmission, although this
is not a necessary requirement for receiving a
transmission. While on a privacy-enabled channel,
the radio is still able to receive clear or unscrambled
transmissions.
Your radio supports two types of privacy, but only one
can be assigned to your radio. They are:
• Basic Privacy
• Enhanced Privacy
To unscramble a privacy-enabled call or data
transmission, your radio must be programmed to
have the same Privacy Key for Basic Privacy, or the
44
English
To Next Page
Loading...
