Assignable Settings or Utility Functions
The following radio settings or utility functions can be
assigned to the programmable buttons.
Tones/Alerts Toggles all tones and alerts on or off.
Power Level Toggles transmit power level
between high and low.
Accessing Programmed Functions
Follow the procedure to access programmed
functions in your radio.
1 Do one of the following:
• Short or long press the programmed button.
Proceed to Step 3.
•
Press to access the menu.
2
Press or to the menu function, and
press to select a function or enter a sub-
menu.
3 Do one of the following:
•
Press to return to the previous screen.
•
Long press to return to the Home
screen.
Your radio automatically exits the menu after a
period of inactivity and returns to the Home
screen.
Push-To-Talk (PTT) Button
The PTT button serves two basic purposes.
• While a call is in progress, the PTT button allows
the radio to transmit to other radios in the call. The
microphone is activated when the PTT button is
pressed.
• While a call is not in progress, the PTT button is
used to make a new call (see Calls on page 27).
Press and hold the PTT button to talk. Release the
PTT button to listen.
If the Talk Permit Tone or the PTT Sidetone is
enabled, wait until the short alert tone ends before
talking.
If the Channel Free Indication feature is enabled
on your radio (programmed by your dealer), you will
hear a short alert tone the moment the target radio
20
English
To Next Page
Loading...
