Status Indicators
This chapter explains the icons, LED indicators, and
audio tones used in the radio.
LED Indicators
LED indicators show the operational status of your
radio.
Blinking
Red
Radio has failed the self-test upon
powering up.
Radio is receiving or sending an
emergency transmission.
Radio is transmitting in low battery
state.
Radio has moved out of range if Auto-
Range Transponder System is
configured.
Solid
Green
Radio is powering up.
Radio is transmitting.
Indicates full battery capacity when the
programmed Battery Strength button is
pressed.
Blinking
Green
Radio is receiving a non-privacy-
enabled call or data.
Radio is retrieving Over-the-Air
Programming transmissions over the
air.
Radio is detecting activity over the air.
Note:
This activity may or may not
affect the programmed channel
of the radio due to the nature of
the digital protocol.
There is no LED indication when
the radio is detecting activity
over the air in Capacity Plus.
Double
Blinking
Green
Radio is receiving a privacy-enabled call
or data.
Solid
Yellow
Radio is monitoring a conventional
channel.
Indicates fair battery capacity when the
programmed Battery Strength button is
pressed.
24
English
To Next Page
Loading...
