Configuring Vibrate Style
Note:
The programmed Vibrate Style button is
assigned by your dealer or system
administrator. Check with your dealer or
system administrator to determine how your
radio has been programmed.
Vibrate Style is enabled when the Vibrating Belt Clip
is attached to the radio with a battery that supports
the vibrate feature.
You can configure the vibrate style by performing the
following action.
Press the programmed Vibrate Style button to
toggle to short, medium, or long option and the
radio vibrates accordingly. Voice Announcement
or Text-to-Speech sounds Vibrate Style.
Alarm Tone Volume Escalation
Your radio can be programmed by your dealer to
continually alert you when a radio call remains
unanswered.
This is done by automatically increasing the alarm
tone volume over time. This feature is known as
Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio
user to call you back when they are able to do so.
This feature is accessible via a programmed One
Touch Access button.
Responding to Call Alerts
Follow the procedure to respond to Call Alerts on
your radio.
When you receive a Call Alert:
• A repetitive tone sounds.
• The yellow LED blinks.
Press the PTT button within four seconds to
respond with a Private Call.
Making Call Alerts
Follow the procedure to make Call Alerts on your
radio.
1 Press the programmed One Touch Access
button.
The green LED lights up.
39
English
To Next Page
Loading...
Need help?
General
