Radio Alignment Procedures
29
Click on the “Program All” button to save the tuned values in the radio.
Bit Error Rate
Definition This screen is used to test the Bit Error Rate (BER) of the radio’s receiver at a desired
frequency.
Bit Error Rate Fields This screen contains the following fields:
Rx Frequency:
This field selects the Receive Frequency directly in MHz.
Test Pattern:
This field selects the Digital test pattern — TIA. Choices are: Standard Tone Test Pattern
(framed 1011) and Standard Interface Test Pattern (CCITT V.52).
Modulation Type:
Figure 12. Front End Filter Alignment Screen
To Next Page
Loading...
