6 Installation and commissioning
315831400/02 EN
This chapter describes how to mount and connect the device correctly. Ob-
serve the following hazard notices prior to opening the device:
DANGER
Electric shock!
Risk of fatal injury due to electrical voltage. Always observe
the following safety regulations when working in or on electri-
cal equipment.
► Disconnect the equipment.
► Lock the equipment to prevent an unintentional restart.
► Make sure all poles are de-energized.
► Ground and short-circuit.
► Cover or cordon off adjacent energized parts.
CAUTION
Risk of injury and damage to the device
The measurement system is hermetically sealed. If you cut the
capillary line, harmful liquid can escape and the measurement
system will be destroyed.
► Never cut the capillary line.
► Do not damage the capillary lines or sensors.
NOTICE
Damage to the device!
Electrostatic discharge can lead to damage to the device.
► Take precautionary measures to prevent the build-up of electrostatic
charges on work surfaces and personnel.
To Next Page
Loading...
Need help?
General
