4 Product description
175831400/02 EN
4.1 Scope of delivery
The product is packaged with protection against moisture and is delivered as
follows:
▪ Pointer thermometer with temperature sensor
▪ Technical documents
Optional:
▪ Passive 4...20mA analog output
▪ Active 4…20mA analog output and ModbusRTU interface
▪ Standard cable gland M25x1.5 (brass), WADI cable gland (brass or stain-
less steel) or offshore cable gland (stainless steel) or EMC double cable
gland
▪ 1/2″ 14NPT adapters
▪ 3/4″ 14NPT adapters
▪ ANSI or M plug connector
▪ Step protection (only in combination with sensor No. 6 VA and sensor No.
7)
Please note the following:
▪ Check the shipment against the shipping documents for completeness
▪ Store the parts in a dry place until installation
▪ The product must remain in the packaging and may only be removed im-
mediately before installation
4.2 Function description
Depending on the device version, the pointer thermometer measures the oil
temperature or determines the winding temperature in power transformers,
distribution transformers or reactors. The temperature sensor of the pointer
thermometer is located in the thermometer pocket mounted in the trans-
former tank. The measured value is displayed directly on the pointer ther-
mometer.