MRC SL-4035SD - Page 6

Calibration VR Build in external calibration VR, easy to
calibrate on 94 dB level by screw driver.
*
Calibrated via external SOUND
CALIBRATOR ( SC-942, optional ).
Calibrator B & K (Bruel & kjaer), MULTIFUNCTION
ACOUSTIC CALIBRATOR Type 4226.
Datalogger Auto 1 second to 3600 seconds
Sampling Time
@ Sampling time can set to 1 second,
Setting range but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card SD memory card. 1 GB to 16 GB.
Advanced
*
Set clock time ( Year/Month/Date,Hour/Minute/ Second )
setting
*
Set sampling time
*
Auto power OFF management
*
Set beep Sound ON/OFF
*
Decimal point of SD card setting
*
SD memory card Format
*
Frequency weighting to A or C setting
Over Indication Show " - - - - ".
Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
Sampling Time Approx. 1 second.
of Display
Data Output RS 232/USB PC computer interface.
* Connect the optional RS232 cable
UPCB-02 will get the RS232 plug.
* Connect the optional USB cable
USB-01 will get the USB plug.
AC output AC 0.5 Vrms corresponding to each
range step.
* Output impedance : 600 ohm.
4