INTRODUCTION
PRODUCT DESCRIPTION
The MS topcoater is a small stand-alone coating unit. The
trolley consists of a topcoat M4 manual powder spray gun,
a topcase S4 controller and a suction system.
In the lower part there is a vibrator, with this, the powder
can be moved and thereby raised better.
Optionally, the trolley can be equipped with a second control
device and a second manual powder spray gun, which are
supplied by a second suction system.
It is put into operation quickly through a simple structure
and is well suited for smaller coating installations. Through
the control connector at the topcase S4 control Unit, the
topcoatermayatanytimebeintegratedintoanexisting
plant or are simply placed as a pre-post-coating.
PA-18-02-R0 (08/2018) 10 / 52 www.carlisleft.com
INTRODUCTION
EN
To Next Page
Loading...