The pictured
relate setting to
the coating with
the MS topcase
Control Unit S4
The settings are
dependent of the
powder.
450.0 g
400.0 g
350.0 g
300.0 g
250.0 g
200.0 g
150.0 g
100.0 g
50.0 g
0.0 g
0 Nm3/h 3 Nm3/h 4 Nm3/h 5 Nm3/h 6 Nm3/h
5%
100%
WARNING
!
DESCRIPTION INDIVIDUAL PARTS
Elite Injector - 1.7mm
Description
The Elite Injector is used in the powder coating to the airless,
continuous precisely adjustable powder feed.
Technical Data
Connecting and operating the Elite Injector and
the safety are to be observed in the operating instruc-
tions for the corresponding MS ECUs described.
PA-18-02-R0 (08/2018) 18 / 52 www.carlisleft.com
INTRODUCTION
EN
To Next Page
Loading...