14
Installation
3.2
Product Installation Check List
Before Installation
•
Review national electrical codes
•
Review local procedural and building codes
•
Determine optimum transmitter placement
•
Determine wire requirements
•
Determine mounting hardware requirements
•
Review approvals and ensure suitability for installation
Mounting
•
For XP remote’s attach appropriate sensor to the junction box (see section 3.3.3 for proper
sensor orientation)
•
For GP remote’s the sensor already comes attached (see section 3.3.3 for proper sensor
orientation)
•
Mount transmitter or junction box using appropriate mounting hardware
•
Confirm free air flow around the sensor
US
To Next Page
Loading...
Need help?
General
