To Next Page

To Previous Page

Description

2 Description

2.1

Display

The TG5000 utilizes an Organic LED (OLED) display which is capable of being seen from a

distance of up to 50 ft (15 m) depending on conditions. The OLED display provides clear and

crisp information in a variety of languages. The gas reading gauge, which wraps around the live

reading area, mimics the reading as a percent of full scale and is also used as a progress bar

during operations which require a countdown.

Fig. 1 OLED Display

In addition to the OLED display, the TG5000 also employs green, yellow and red LEDs on the side

and lower middle of its face. These are used to signal normal operating conditions, fault conditions

and alarm conditions.

The TG5000 will go into “Eco-Mode” after 3 minutes of no interaction and if not in an alarm

condition. While in Eco-Mode, the main display will power down and the status LED's will remain

illuminated to determine that the device is not in an alarm condition. The OLED display can be

powered up by touching either of the two EZ touch buttons on the front display.

Questions and Answers:

Need help?

Do you have a question about the MSA TG5000 and is the answer not in the manual?

MSA TG5000 Specifications

General