however, does NOT detect the presence of hydrogen gas
and must never be used to monitor for hydrogen gas.
7. The Ultima XIR Infrared Combustible Gas Monitor does not
detect the presence of acetylene gas and the presence of
acetylene gas will degrade sensor performance.
Failure to follow the above can result in serious personal injury
or death.
"
CAUTION
1. As with all gas monitors of these types, high levels of, or
long exposure to, certain compounds in the tested
atmosphere could contaminate the sensors. In
atmospheres where an Ultima X Series Gas Monitor may
be exposed to such materials, calibration must be
performed frequently to ensure that operation is
dependable and display indications are accurate.
2. The Ultima X Series Gas Monitor must not be painted. If
painting is done in an area where a Monitor is located,
care must be exercised to ensure that paint is not
deposited on the sintered, metal flashback arrestor in the
inlet fitting of the Ultima X Series Gas Monitor, if so
equipped. Such paint deposits would interfere with the
diffusion process, whereby a sample of the atmosphere
being monitored diffuses into the Monitor.
3. The only absolute method to ensure proper overall
operation of an Ultima X Series Monitor is to check it with
a known concentration of the gas for which it has been
calibrated. Consequently, calibration checks must be
included as part of the routine inspection of the system.
4. Protect the Ultima X Series Gas Monitor from extreme
vibration. Do not mount the sensing head in direct sunlight
as this may cause overheating of the sensor.
Failure to follow the above can result in injury, product damage
and/or an unsafe condition.
To Next Page
Loading...
Need help?
General
