3-21
BIOS Setup
Cool’n’Quiet Support
This item enables or disables the Cool’n’ Quiet Function. Setting options: [Enabled],
[Disabled].
HT Frequency Select
This item allows you to select the Hyper Transfer frequency. Setting options:
[200Mhz], [400Mhz], [600Mhz], [800Mhz], [1000Mhz].
Dynamic Overclocking
Dynamic Overclocking Technology is the automatic overclocking function, included in
the MSI
TM
’s newly developed CoreCell
TM
Technology. It is designed to detect the load
balance of CPU while running programs, and to adjust the best CPU frequency
automatically. When the motherboard detects CPU is running programs, it will speed
up CPU automatically to make the program run smoothly and faster. When the CPU is
temporarily suspending or staying in the low load balance, it will restore the default
settings instead. Usually the Dynamic Overclocking Technology will be powered only
when users' PC need to run huge amount of data like 3D games or the video process,
and the CPU frequency need to be boosted up to enhance the overall performance.
Setting options:
[Disabled] Disable Dynamic Overclocking.
[Private] 1st level of overclocking, increasing the CPU frequency by 1%.
[Sergeant] 2nd level of overclocking increasing the CPU frequency by 3%.
[Captain] 3rd level of overclocking, increasing the CPU frequency by 5%.
[Colonel] 4th level of overclocking, increasing the CPU frequency by 7%.
MSI Reminds You...
1. Even though the Dynamic Overclocking Technology is more stable
than manual overclocking, basically, it is still risky. We suggest
user to make sure that your CPU can afford to overclocking regu-
larly first. If you find the PC appears to be unstable or reboot
incidentally, it's better to disable the Dynamic Overclocking or to
lower the level of overclocking options. By the way, if you need to
conduct overclocking manually, you also need to disable the Dy-
namic OverClocking first.
2. Meanwhile, there are two functions to protect user's system from
crash.
- There is a safe key "Ins" in BIOS. In case the overclocking
fails, you can press "Ins" key while system rebooting to
restore to the BIOS defaults.
- If the system incidentally reboot for four times, the BIOS will
also be restored to the defaults.
MSI Reminds You...
For the purpose of ensuring the stability of Cool’n’Quiet function, it is
always recommended to have the memories plugged in DIMM2.
For more information about Cool’n’Quiet in Chapter4, or please visit
MSI’s website at www.msi.com.tw.
To Next Page
Loading...
Need help?
General
