USER MANUAL V1.0 | Updated January 19, 2019 40
LCD Backlight
Adjust the time for the screen backlight. Your screen will become black but all activity still
working. Turn on screen by press any key on keyboard.
From the Settings menu, select LCD Backlight. Then select the desired time to turn off
screen and then press Enter.
Reset
Reset the memory of Counter variable on message. The memory of Counter will help you
save the current value of Counter even if you stop print or machine is turned off.
From the Settings menu, select Reset. Press Enter to erase memory of counter (printer will
print from start value).
Bi-directional
When we enable this function, printer will automatic change direction after some times
print. The 1st in direction: left to right, 2nd will be printed right to left.
From the Settings menu, select Bi-directional. Then press Enter and select Enable to used
this function.
Adjust: Setup Delay for 2
nd
print (auto change direction) same setup Delay before.
Trigger: the times that the printer auto change direction.
Set up backup
Backup is save some information as: message, logo, language and settings to usb flash
and Restore it on another printer. It will help you save a lot of time.
From the Settings menu, select Set up backup. Please insert usb flash before choose
Backup and restore.
NOTES:
Backup file will only restore on another printer with same Model and firmware version.
About
See information of the current firmware.
Update to a different firmware (see UPDATE FIRMWARE INSTRUCTIONS).
PC APPLICATION INTRODUCTION
Hardware setup
Do as below on machine.
• Step 1: connect USB cable from machine to PC.
• Step 2: open Operation menu, select “Connect PC”. If you cannot select, please stop
print first, then select again.
Software setup
Install application
NOTES:
Please install the Microsoft .NET Framework 4.0 or newer. Use this link
http://www.microsoft.com/en-us/download/details.aspx?id=17851
To Next Page
Loading...
