Need help?Do you have a question about the MSSC Smart-Jet Plus and is the answer not in the manual?
General| Technology | Thermal Inkjet |
|---|---|
| Print Resolution | 600 dpi |
| Maximum Print Height | 12.7 mm |
| Controller | Built-in |
| Interface | USB, Ethernet |
| Connectivity | USB, Ethernet |
| Supported Media Types | Porous and non-porous surfaces |
| Operating Temperature | 5°C to 40°C |
| Ink Compatibility | Water-based and solvent-based inks |
Details warranty terms and conditions for the machine, including exclusions.
Provides an overview of the Smart-Jet Plus Thermal Inkjet Coder and its capabilities.
Lists the detailed technical specifications of the Smart-Jet Plus printer.
Describes how to navigate the main menu and its submenus on the machine.
How to create, open, edit, and delete messages on the machine.
Details on starting, stopping, purging, and PC connection.
Configuration options for speed, resolution, and density.
Parameters for controlling print output and print head.
Tools for creating and editing messages, templates, and graphics.
Functions like purge, ink cost, event log, and language settings.
How to use the encoder for print quality optimization.
Steps for creating new messages and templates using the software.
Tools for deleting, cutting, copying, and pasting design elements.
Functions for adding shapes, text, data fields, and images.
Initial steps for installing the machine on a conveyor.
Guidelines for connecting external sensors, encoders, and alarms.
How to connect different types of external sensors to the machine.
Specifications and connection details for the encoder.
Diagram for connecting external sensor and encoder simultaneously.
Explains the function of alarm light LEDs and associated pins.
Lists error codes and their corresponding descriptions for troubleshooting.
How to trigger functions and handle NPN signals.
Guide to creating initial messages using the machine's interface.
Steps for creating messages directly on the printer using the interface.
How to access and navigate Message, Operation, and Settings menus.
Procedures for inserting logos into printed messages.
How to insert and configure product counters.
Configuring independent counters for products or boxes.
Setting up dual counters for box and product counts.
Controls for starting, stopping, and purging the print head.
Steps to update logos using a USB flash drive.
Process for updating logos using a smartphone.
Using the DESIGNING section to create new message templates.
To Next Page
