MSSC Smart-Jet Plus - Printer Features and Modes; Encoder Integration and Configuration

USER MANUAL V1.0 | Updated January 19, 2019 11
Encoder
Encoder is recommended to optimize maximum print quality.
Turn ON Encoder to operate Machine with encoder. Print speed of Machine will be
automatically synchronized with conveyor speed. You have 3 mode: Real, Fast and Slow.
Turn OFF Encoder to disable encoder. Input your desired speed at Speed to synchronize
with the speed of the conveyor.
Max Speed: shows the maximum speed you can achieve with the current resolution and
density.
NOTES:
• Ensure your encoder is working, if it is ON, and can detect the objects.
• To make a test print without conveyor, turn OFF encoder.
Printer
Unit
Select your measurement Inches or Millimeters.
Direction
Select your print direction Left to Right or Right to Left.
Select Rotate View to print upside down.
Rotate View
Upside down the current design of your message.
Density
Select your desired optical density. There are 5 levels to select.
Resolution DPI
Select your desired resolution. There are 7 levels to select with PC mode.
Printing Mode
Select your printing mode: Continuous Mode or Sensor Mode.
Sensor Mode
Machine prints when sensor is triggered.
 Select Internal to print with a built-in sensor on Machine.
 Set Delay before and Delay after print to have your message printed at the desired
position.
 Select External to print with external sensor.
 Input distance from external sensor to the print head, set Delay before and Delay after
print to have your message printed at the desired position.
 Go to Repeat Sensor times to input how many prints to be repeated.
 Go to Sensor Fixed Length to input the value or select the value by click up or down
at .
Continuous Mode
You have 2 mode: Level and Immediate.
Level: Machine will print continuously when sensor ON and stop when sensor OFF.