USER MANUAL V1.0 | Updated January 19, 2019 23
Enter : go to the next line.
Backspace : delete characters.
ESC : escape and save / unsaved messages.
While creating message, press Insert on the keyboard to insert your desired fields.
Symbol
Insert the following symbols into the message (extended ASCII).
In the message editing window, press Insert and use or arrow keys to move the cursor to
Symbol and press Enter. Use the arrow keys to move your cursor to the desired object and
press Enter to insert the symbols into message.
Below symbols are available to be inserted from your wireless keyboard:
Logo
Insert logo or image from Machine into message.
Your logo should be updated or setup in the Settings menu.
In the message editing window, press Insert and use or arrow keys to move your cursor
to Logo and press Enter. Move your cursor to the desired Logo and press Enter.
NOTES:
Insert logo first, then input message if you need to print a logo at the beginning of the
message.
Input message, then insert logo if you need to print a logo at the end of the message.
Logo should be inserted in the last line of your message if you are printing multiple lines to
ensure it is fully printed.
Counter
Insert product counter into the message. There are Single and Box/Lot.
In the input section, press Insert and use or arrow keys to move the cursor to Counter and
press Enter. Select your desired object and press Enter.
Single
Is an independent counter. This is used to count the products printed, can be a product or a
box.
To Next Page
Loading...
