MT Vision HS-220 - PIR Recording; Manual Recording

5. Main Menu
16 ENGLISH
Press the p or q button to select the menu
item „PIR Recording“. In this menu, you can
specify that a camera automatically records vi-
deo when it perceives a heat source.
In the real-time monitoring, press the t or u button to select the camera for video recordings as
the current camera. Press the Record button on the monitor. The record icon is displayed
on the screen and confirmed that the recording starts. Press the recording button again to stop
the recording.
Press the p or q button to select a camera and confirm with OK. Using the t or u button to
enable or disable the PIR recording.
Remarks:
• The infrared range of the PIR sensor is about 5 meters. If the distance is larger, the scan may fail.
• If a video recording is longer than 5 minutes, a video file will be saved automatically. Accor-
dingly, it is stored on the storage medium every 5 minutes a video.
• Simultaneous recordings with multiple cameras (max. 4 cameras) is possible. The recorded
videos of the respective cameras are placed independently of each other in a separate video
folder.
PIR Recording
Manual Recording
Hinweis:
Die Erkennung einer Wärmequelle reagiert
nicht nur auf Personen. Auch Tiere oder
sonstige Dinge die sich vor der Kamera
bewegen, können Wärme ausstrahlen und
dadurch eine Aufnahme auslösen.