EasyManua.ls Logo

MT Vision HS-220 - 8 Specifications

MT Vision HS-220
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Camera
Imaging Sensor ......................................1/5 inch Color CMOS
Video resolution .....................................656 x 488
Viewing angle ......................................... 50 °
Power supply .......................................... 5 volts
Current consumption .............................max. 500 mA
IP degree of protection ..........................IP66
Night vision distance ..............................max. 20 m
Dimensions (W x D x H) .........................164 x 81 x 172 mm (including bracket)
Weight ....................................................686 g
Monitor
LCD screen .............................................7 inch TFT LCD
LCD screen resolution ...........................800 x 480
SD card support .....................................up to 32 GB
Hard Drives supported ...........................up to 1 TB
Video frame rate .....................................max. 30 fps
Video resolution .....................................CIF / VGA
Video format ...........................................AVI
Data output ............................................USB 2.0
Power supply .......................................... 5 volts
Current consumption .............................max. 700 mA
Accu .......................................................Li-ion Accu
Dimensions (W x D x H) .........................210 x 125 x 68 mm
Weight approx ........................................ 510 g
Range .....................................................up to 300 m
Operating temperature ..........................-10 ° C ~ + 50 ° C
Humidity .................................................15 ~ 85% RH
* All specifications are subject to minor changes may be made without notice.
Turn off the system when not in use.
This product can only be completely disconnected from the power supply by removing the
power supply.
Do not cut through the power cable of this product to make it operate with a different power
source.
Imortant notes:
29
8. Specications
ENGLISH

Table of Contents