WI-FI DCS USER’S GUIDE 26
Troubleshooting
CONDITION
No DCS Explorer Found
POSSIBLE CAUSE(S)
Make sure your smart device is connected to
the same Wi-Fi Network as the DCS Explorer. In
MTH mode, this is the MTH Wi-Fi Network. In
HOME mode, this is your home network.
Make sure the TIU has power applied. Conrm
the green power LED is lit.
Engine Inactive - will not move to
active list
Make sure the engine is on the track and track
power is applied.
Resetting your DCS Explorer Use a paperclip or toothpick to press and hold
the reset button for 10 seconds then release
it. The unit must be powered.
To Next Page
Loading...