WI-FI DCS USER’S GUIDE 24
Navigational Tips
Like any app, once you know the general layout and how to move around, things get much
easier. So, here are a few tips to help you nd your way around.
Engine Selection
There are several ways to select engines. We’ve made this simple and intuitive for you.
1. Tapping the ENGINE NAME at the top of the screen will toggle between the current
engine and the last engine ran.
Note: If there is only one active engine, tapping the engine name will open the
ENGINE LIST.
2. Tapping the DOWN ARROW ICON in the upper right of the screen will pull down the
ENGINE LIST.
3. From the ENGINE LIST, tapping any active engine will take you to the MAIN
CONTROL SCREEN for that engine.
4. From the ENGINE LIST, tapping the UP ARROW ICON in the upper right of the screen
or at the bottom center of the screen will return you to the previous screen.
Main Control and Secondary Control Screens
These two screens are probably the most common screen you will use while operating your
trains. You can easily switch back and forth between these screens in a couple of different
ways.
1. From the MAIN CONTROL SCREEN, swipe upward or tap DBL DOWN ARROW ICON to move
down to the SECONDARY CONTROL SCREEN.
2. From the SECONDARY CONTROL SCREEN, swipe upward or tap DBL UP ARROW ICON to
move up to the MAIN CONTROL SCREEN.
Cntl Icon: Tapping here takes you to the MAIN
CONTROL SCREEN
To Next Page
Loading...