MTS Systems FlexTest IIm User Manual

MTS 793 Controller Hardware
208
Model 493.42 System I/O Connections
The Model 493.42 System I/O module is a dual-wide VME-based slave
board used in the Model 493.02 chassis.
• Provides box-in and box-out, analog and digital I/O, E-Stop, and
HSM and HPU control.
• Contains three general purpose digital input channels and three
general purpose digital output channels.
• Interfaces the controller with a hydraulic power unit.
• Interfaces the controller with a hydraulic service manifold and
other devices.
• Provides one BNC channel for analog output signals. The output
signals are within ±10 V DC.
• Provides one BNC channel of analog input. The input signals must
be within ±10 V DC.
J25 Hydraulic Power Unit Connection
Connector J25 HPU controls the hydraulic power unit (HPU).
• The connector provides 24 V logic signals to control the HPU.
• The connector may be connected directly to MTS Series 505 HPUs,
other MTS HPUs via the Model 493.07 HPU Converter Box, and
24 V PLC compliant HPUs.
Note See “Hydraulic Configurations” on page 221 for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest IIm Specifications

General

Brand	MTS Systems
Model	FlexTest IIm
Category	Controller
Language	English