MTS 793 Controller Hardware
FlexTest GT Controllers
Introduction
24
Power supply #1
+5 V DC
±15 V DC
maximum draw is 400 W total
40 A
7. 5 A
Power supply #2
±12 V DC
+24 V DC
maximum draw is 400 W total
4 A
10 A
Weight approximately 45 kg (100 lb) in stand
alone configuration
* The specification shown conforms to CE Low Voltage Directive
requirements. The specification allows for 10% of the values
stated. The actual voltage the 493.10 chassis can operate is
90–264 V AC.
FlexTest GT Specifications (part 2 of 2)
P
ARAMETER SPECIFICATION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...