EasyManua.ls Logo

MTU 12V2000M93 - Engine Oil Filter - Replacement

MTU 12V2000M93
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.14 Oil Filtration / Cooling
7.14.1 Engine oil filter – Replacement
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Oil filter wrench
F30379104 1
Engine oil
Oil filter
(→ Spare Parts Catalog)
SOLAS shield
(→ Spare Parts Catalog)
DANGER
Rotating and moving engine parts.
Risk of crushing, danger of parts of the body being caught or pulled in!
Only run the engine at low power. Keep away from the engine's danger zone.
WARNING
High level of engine noise when the engine is running.
Risk of damage to hearing!
Wear ear protectors.
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
Wear protective clothing, gloves, and goggles / safety mask.
Avoid contact with skin.
Do not inhale oil vapor.
NOTICE
Damage to component!
Severe material damage!
For filter replacement with the engine running, operate the engine at low engine load.
The filter which is to be replaced must be cut out for a brief period only.
Replacing oil filter with the en-
gine stopped
1. Stop engine (→ Page 62) and disable en-
gine start.
2. Cut out the filter to be replaced.
A Right filter cut out
B Both filters cut in (normal operating
position)
C Left filter cut out
112 | Task Description | M015655/05E 2015-06
TIM-ID: 0000006365 - 007

Table of Contents

Related product manuals