EasyManua.ls Logo

MTU 12V2000M93 - After Stopping the Engine

MTU 12V2000M93
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.11 After stopping the engine
Preconditions
MTU Fluids and Lubricants Specifications (A001061/..) are available.
After stopping the engine
Item Measure
Coolant circuit Drain coolant (→ Page 123) if:
freezing temperatures are expected and the engine is to remain out of
service for an extended period, but engine coolant has no antifreeze addi-
tive;
the engine room is not heated;
the coolant is not kept at a suitable temperature;
the antifreeze concentration is insufficient for the engine-room tempera-
ture;
antifreeze concentration is 50 % and engine-room temperature is below
-40°C.
Raw water Drain
if freezing temperatures are to be expected and the engine is to remain
out of service for an extended period.
Engine control system Switch off.
Air intake and exhaust sys-
tem
Out-of-service-period > 1 week
Seal engine's air and exhaust sides.
Engine Out-of-service-period > 1 month
Depreserve engine (→ MTU Preservation and Represervation Specifica-
tions A001070/..)
64 | Operation | M015655/05E 2015-06
TIM-ID: 0000002324 - 008

Table of Contents

Related product manuals