7
Configuring the job computer for work
Configuring external operating devices
3. You have the option of configuring the parameters “No. of Dec. Places” and “Decimal (fixed)”
for each category and subcategory.
⇨ All of the displayed values will be converted and displayed in the configured units.
“No. of Dec. Places” parameter
Enter how many decimal places should be displayed.
“Decimal (fixed)” parameter
Activate this parameter if the decimal point should not be automatically shifted. The decimal places
then also remain even with larger numbers.
Configuring external operating devices
Use the following parameter on the “SETTINGS” screen for the configuration:
“Joystick” parameter
Select how you will be using the joystick.
▪ “No joystick”
You are not using a joystick.
▪ “Müller-Elektronik (ME)”
You are using a joystick from Müller-Electronik.
▪ “ME with assistance”
You are using a joystick provided by Müller-Elektronik and when opening for the first time, you
want to see a screen showing the functions you can execute using the joystick. For this purpose,
you must press the
function button on the screen
Entering the password
For the configuration of several functions of the job computer, you must previously enter a password
on the “SETTINGS” screen to activate these functions.
Activating licenses
If you want to extend the functions of your job computer, you can activate additional licenses. To do
so, you need an activation key.
1. On the work screen, press:
> ( ) >
⇨ The “LICENCES” screen appears.
2. Select the application that you want to activate.
3.
- As an option, you can activate a temporary licence for the selected application.
To Next Page
Loading...
Need help?
General
