Muller Elektronik SLURRY-Controller 3.0 User Manual

Technical specifications
Technical specifications of the job computer
9
30322453-02-EN
V4.20191001
59
Technical specifications
Technical specifications of the job computer
ECU-MIDI 3.0 job computer
1st processor:
32-bit ARM Cortex™-M4 CPU 168 MHz, 2048 KB flash; 256 KB RAM
2nd processor:
32-bit ARM Cortex™-M4 CPU 168 MHz, 2048 KB flash; 256 KB RAM
External memory:
SPI-Flash 16 MB; SDRAM 16 MB; FRAM 16 kByte
Connections:
▪ 42-pin connector for connecting actuators/sensors
▪ 2x 16-pin connector for power supply and CAN
The connectors can be locked and equipped with single conductor
insulations.
Interfaces:
up to 3xCAN*
Power supply:
12 V electrical system (9-16 V), maximum current consumption 30 A
Current consumption (IN): 500 mA (at 14.4 V without power output, without supply to external
sensors)
Standby current (OFF):
70 μA (typ.)
Temperature range:
-40 … +70 ºC
Housing: Anodized aluminium continuous cast casing, plastic lid with seal and
pressure compensation element, stainless steel screws
Protection rating:
IP6K6K (with installed connectors)
Environmental tests: Vibration and shock testing in accordance with DIN EN 60068-2
Temperature testing in accordance with IEC68-2-14-Nb, IEC68-2-30
and IEC68-2-14Na
Protection testing in accordance with DIN EN 60529
Electromagnetic compatibility according to DIN EN ISO 14982: 2009-
12
Dimensions:
Approx. 262 mm x 148 mm x 62 mm (L x W x H, without connector)
Weight:
ca. 1 kg
Available languages
You can set the following languages in the software for the operation of the implement:
9
9.1
9.2

Muller Elektronik SLURRY-Controller 3.0 Specifications

General

Brand	Muller Elektronik
Model	SLURRY-Controller 3.0
Category	Controller
Language	English