What to do if the target height of the axle cannot be maintained on Muller Elektronik MIDI 3.0 Controller?
If the target height of the axle on your Muller Elektronik Controller cannot be maintained due to a mechanical, hydraulic, or electrical malfunction, you should contact Customer Service.
General| Brand | Muller Elektronik |
|---|---|
| Model | MIDI 3.0 |
| Category | Controller |
| Language | English |
Provides essential safety guidelines for operating the sprayer and its components.
Describes the role of the job computer as a central control unit for field sprayers.
Provides instructions and safety precautions for installing the job computer.
Details the process of connecting the job computer to the tractor's ISOBUS power socket.
Step-by-step guide on starting the job computer and the ISOBUS terminal.
Overview of the main display areas and their information content.
Instructions for entering tank contents manually or via TANK-Control.
Explains how to operate the sprayer boom functions using the terminal.
Details how to raise, lower, and manage boom functions, including DISTANCE-Control.
Explains the process of folding and unfolding the sprayer boom.
Guides on independently or simultaneously moving the boom wings.
Explains how to adjust the boom angle for slopes.
Covers procedures for starting spray application in manual and automatic modes.
Explains how to control and adjust the spray application rate.
Describes how to manually set the application rate when in manual mode.
Details the conditions and operation of automatic application rate regulation.
Explains how to define the desired application rate for the sprayer.
Describes how to use the ME joystick to control sprayer functions.
Explains the AIRTEC system for controlling spray drop size using compressed air.
Guides on setting essential parameters before initial sprayer start-up.
Details the procedures for calibrating the flow meter for accurate measurements.
Step-by-step guide for precise flow meter calibration using the tank method.
Explains the less time-consuming nozzle method for flow meter calibration.
Guides on selecting and configuring the source for the sprayer's speed data.
Details nozzle configuration for sprayers using pressure sensor regulation.
Provides instructions for calibrating individual nozzles for accurate application.
Lists common alarm messages and provides guidance for resolving faults.
Lists the detailed technical specifications for the ECU-MIDI 3.0 job computer.
Lists the detailed technical specifications for the ECU-MAXI 3.0 job computer.
To Next Page
