About the job computer
Job computer functions
About the job computer
Job computer functions
The SPRAYER-Controller MIDI 3.0 and MAXI 3.0 job computers are ISOBUS job computers that can
control the operation of field sprayers.
The ISOBUS job computer is the control central of the sprayer. Several sensors are connected to the
job computer, which monitor important implement parts. The job computer controls the implement
based on these signals and on the operator's specifications. An ISOBUS terminal serves as an
interface. All implement-specific data is stored in the job computer and is therefore maintained even
when changing the terminal.
System Overview
Depending on which job computer is used as the base computer for the main system, and which
additional components are installed, the overall system can have different sizes.
Example: MAXI 3.0 as the main job computer
To Next Page
Loading...