Operating job computer on the field
Using foam markers
Viewing the assignment of the joystick
The assignment of the joystick can only be viewed when your joystick works with the AUX1 auxiliary
protocol.
To display the button assignment on the screen:
ME Joystick is configured. [➙ 58]
1. - Press until the button appears.
2. - Press.
⇨ The button assignment appears:
3. , , - Press to view the assignment on each level.
4. You can also activate the Preview mode [➙ 48].
Using foam markers
Foam markers produce foam that can be applied by the field sprayer driver on the field at the ends of
the boom. The driver can then drive parallel to the foam.
To access the controls:
> .
Use the following function keys to operate the function:
Switches the left foam marker on and off.
Switches the right foam marker on and off.
To Next Page
Loading...
Need help?
General
