Maintenance
Change the oil in the vacuum pump
68 13.05.2014
¾ Fill the vacuum pump with oil up to the middle of the oil sight
glass. Use only oils that are approved by the manufacturer, see
'Spare Parts' section or the spare parts catalogue.
Info
Only use low odour synthetic oil if food is being packed.
¾ Check oil level on the oil sight glass:
– The oil level should reach the middle of the oil sight glass.
– If oil level is under the MIN mark, add oil.
max.
min.
¾ Replace the sealing ring in the screw plug.
To Next Page
Loading...
