© Munters AB, 2020 68
7.13
Defining the Measuring Fan
Define one digital input sensor as a measuring fan (refer to Mapping Devices, page
40).
•
Define:
o
Operation: Define the logical state (normally open or close) which
corresponds to the input idle/off state.
o
Brand: Select the fan manufacturer.
o
Inner: Select the fan circumference.
o
Related Fan: If the measuring fan is to be for compensation, define the fan to
be used to provide the extra air. Refer to Ventilation Compensation in the
User Manual.
NOTE A relay or port must be defined as a fan for this parameter to be enabled.
o
Enable Mode: Enable/disable the sensor.