Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 110
Print Setup
(cont.)
PCL Setup
(cont.)
Pen Width Adjust ON, OFF The thinnest line width
in PCL, a 1-dot line,
may look broken.
ON: when the thinnest
line width is specified,
line width is emphasized
to look wider.
OFF: the line appears
as specified.
Tray ID#
Tray 2 :
MP Tray :
1 ~ 5 ~ 59
1 ~ 4 ~ 59
Sets the number to
specify Tray 2 and MP
Tray for the paper feed
destination command in
PCL5e emulation.
PS Setup L1 Tray Type 1, Type 2 Switches between
Postscript types.
SIDM Setup SIDM Manual ID# 0 ~ 2 ~ 9 Set up Pn specified in
MANUAL by MANUAL-1
ID No.FX/PPR Emu in
CSF control command
(ESC EM Pn).
SIDM Manual2 ID# 0 ~ 3 ~ 9 Set up Pn specified
MANUAL by MANUAL-2
ID No.FX/PPR Emu in
CSF control
command(ESC EM Pn).
SIDM MP Tray ID# 0 ~ 4 ~ 9 Set up Pn specified
TRAYO(MP Tray) by MP
Tray ID No.FX/ P PR Emu
in CSF control
command(ESC EM Pn).
SIDM Tray1 ID# 0 ~ 1 ~ 9 Set up Pn specified
TRAY 1by Tray 1 ID
No.FX/PPR Emu in CSF
control command(ESC
EM Pn).
SIDM Tray2 ID# 0 ~ 5 ~ 9 Set up Pn specified
TRAY 2 by Tray 2 ID
No.FX/PPR Emu in CSF
control command (ESC
EM Pn).
IBM PPR
Setup
Character Pitch 10 CPI, 12 CPI, 17 CPI,
20 CPI, Proportional
Specifies character pitch
in IBM PPR emulation.
Font Condense 12CPI to 20CPI,
12CPI to 12CPI
Specifies 12CPI pitch for
Condense Mode.
Character Set SET-1, SET-2 Specifies a character
set.
Symbol Set IBM-437 Specifies a symbol set.
Letter O Style Enable, Disable Specifies the style that
replaces 9BH with letter
o and 9DH with a zero
Zero Character Normal, Slashed Sets the zero to be
slashed or unslashed.
Line Pitch 6 LPI, 8 LPI Specifies the line
spacing.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English