Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 112
Print Setup
(cont.)
EPSON FX
Setup (cont.)
Line Length 80 Column,
136 Column
Specifies the number of
characters per line.
Form Length 11.7 inch, 12 inch Specifies the length of
paper.
TOF Position 0.0 ~ 1.0 inch Specifies the distance of
print from the top edge
of the paper.
Left Margin 0.0 ~ 1.0 inch Specifies the distance of
print from the left hand
edge of the paper.
Fit To Letter Enable, Disable Sets the printing mode
that can fit print data,
equivalent to 11 inches
(66 lines), in the
LETTER-size printable
area.
Tex t Hei ght Same, Diff Sets the height of a
character.
SAME: Regardless of
CPI, same height
DIFF: As CPI, character
heights vary.
Network
Menu
Network
Setup
TCP/IP Enable, Disable Enables or disables this
network protocol.
IP Version IPv4, IPv4+IPv6 Set up the IP version.
Display condition: TCP/
IP protocol must be
enabled.
NetBEUI Enable, Disable Enables or disables this
network protocol.
NetBIOS Over TCP Enable, Disable Enables or disables this
network protocol.
Display condition: TCP/
IP protocol must be
enabled.
NetWare Enable, Disable Enables or disables this
network protocol.
EtherTalk Enable, Disable Enables or disables this
network protocol.
Frame Type Auto, 802.2, 802.3,
ETHERNET II, SNAP
Selects the Ethernet
MAC layer frame type.
Display condition:
Netware must be
enabled.
IP Address Set Auto, Manual Specifies whether IP
address allocation is
automatic (DHCP) or
manually assigned.
Display condition: TCP/
IP protocol must be
enabled.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English