Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 113
Network
Menu (cont.)
Network
Setup (cont.)
IPv4 Address xxx.xxx.xxx.xxx Current assigned IP
address.
To change, enter the
address using the
numerical keypad. Press
Enter to register new
address.
Display condition: TCP/
IP protocol must be
enabled.
Subnet Mask xxx.xxx.xxx.xxx Current assigned subnet
mask. To change,
proceed as above.
Display condition: TCP/
IP protocol must be
enabled.
Gateway Address xxx.xxx.xxx.xxx Current assigned
gateway address. To
change, proceed as
above.
Display condition: TCP/
IP protocol must be
enabled.
DNS Server
(Primary)
0.0.0.0 The IP address of your
DNS server (primary).
DNS Server
(Secondary)
0.0.0.0 The IP address of your
DNS server
(secondary).
WINS Server
(Primary)
0.0.0.0 The IP address of your
WINS server (primary).
WINS Server
(Secondary)
0.0.0.0 The IP address of your
WINS server
(secondary).
Web Enable, Disable Enables or disables web
config. facility.
Display condition: TCP/
IP protocol must be
enabled.
Telnet Enable, Disable Enables or disables
Telnet config. facility.
Display condition: TCP/
IP protocol must be
enabled.
FTP Enable, Disable Enables or disables
communication via FTP.
Display condition: TCP/
IP protocol must be
enabled.
IPSec Enable, Disable Enable via the web page
or Configuration Tool.
SNMP Enable, Disable Enables or disables
SNMP of FTP (TCP/IP or
NetWare).
Display condition: TCP/
IP protocol must be
enabled.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English