Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 114
Network
Menu (cont.)
Network
Setup (cont.)
Network Scale Normal, Small Normal: Can work
effectively even when
connected to a HUB that
has a spanning tree
feature. However,
printer start up time
gets longer when
computers are
connected to two or
three small LANs.
Small: Computers can
cover from two or three
small LANs to a large
LAN, but it may not
work effectively when it
is connected to a HUB
with a spanning tree
feature.
HUB Link Setting Auto Negotiate,
100BASE-TX FULL,
100BASE-TX HALF,
10BASE-T FULL,
10BASE-T HALF
Sets the hub linking
method.
Network PS-Protocol ASCII, RAW Select PostScript data
format for the network
port.
Factory Defaults Execute Select Yes to reload the
settings present when
the unit was setup by
the manufacturer.
Mail Server
Setup
SMTP Server user defined Set the host name for
the SMTP server.
SMTP Port 1 ~ 25 ~ 65535 Set the port number.
SMTP Encryption None, SMTPS,
STARTTLS
Select encryption
method.
POP3 Server user defined Set the IP address or
host name for the POP3
server.
POP3 Port 1 ~ 110 ~ 65535 Set the port number.
POP Encryption None, POP3S,
STARTTLS
Select encryption
method.
Authentication
Method
None, SMTP, POP Set the authentication
method.
SMTP User ID user defined Set a user ID for the
SMTP server.
SMTP Password user defined Set a password for the
SMTP server.
POP User ID user defined Set a user ID for the
POP3 server.
POP Password user defined Set a password for the
POP3 server.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English