Muratec MFX-C2700 Configuration Guide

Appendix A - menu system > 116
Management
(cont.)
System
Setup (cont.)
Near Life LED Enable, Disable Enable/disable near life
LED.
Status In Near Life Enable, Disable Enable: Display a near-
life warning.
Disable: Do not display
a near-life warning.
Address Information
Lock Time Out
1 ~ 3 ~ 10 minute(s) Enter time-out duration.
USB Memory
Interface
Enable, Disable Select disable to turn off
scan to USB function.
Panel Contrast -10 ~ 0 ~ +10 Adjust the LCD panel
contrast.
Power Save Power Save Time 1 minute, 2 minutes,
3 minutes, 4 minutes,
5 minutes, 10 minutes,
15 minutes,
30 minutes,
60 minutes,
120 minutes
Select desired time
interval before machine
enters power save
mode.
Sleep Time 1 minute, 2 minutes,
3 minutes, 4 minutes,
5 minutes, 10 minutes,
15 minutes,
30 minutes,
60 minutes,
120 minutes
Select desired time
interval before machine
enters sleep mode.
Silent Mode ON, OFF Enable/disable silent
mode.
ECO Mode ON, OFF When ON, if the
machine is in power
save mode and you
send a small print job (1
or 2 pages), the
machine will print the
job without warming the
fuser to the “normal”
operating temperature
beforehand.
Memory
Setup
Receive Buffer Size Auto, 0.5 MB, 1 MB,
2 MB, 4 MB, 8 MB
Specify the size of the
buffer you want to use
to receive data.
Resource Save Auto, OFF, 0.5 MB,
1 MB, 2 MB, 4 MB, 8 MB
Specify the size of the
buffer you want to use
for resource saving.
Storage
Maintenance
Setup
Check File System Execute Making changes will
automatically restart
the system.
Erase SD Memory
Card
Execute Deletion of all data
stored in the SD Card.
Data cannot be
recovered.
Initial Lock Enable, Disable Enable/disable initial
lock.
ITEM OPTION VALUE/DESCRIPTION

Muratec MFX-C2700 Specifications

General

Brand	Muratec
Model	MFX-C2700
Category	All in One Printer
Language	English