Why is there a configuration error in my Murr Elektronik CUBE20S?
A configuration error occurs when the module whose MF LED is flashing does not correspond to the current configuration. To resolve this, match the configuration and hardware structure.
How to fix total current exceeded error in Murr Elektronik I/O Systems?
If the total current for the electronics supply exceeds the maximum current, plug in the power module, Art-No. 57131.
General| Product Category | I/O Systems |
|---|---|
| Product Type | Digital I/O Module |
| Manufacturer | Murr Elektronik |
| Series | CUBE20S |
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 8 |
| Power Supply Voltage | 24 V DC |
| Protection | IP20 |
| Input voltage | 24 V DC |
| Housing material | Plastic |
| Operating temperature | -25...+60 °C |
Information on how to obtain technical support and assistance.
Overview of the manual's purpose and scope.
Explanation of symbols used for safety and notes.
List of trademarks mentioned in the document.
Identifies intended users and their roles.
Defines the system's design and intended applications.
Essential safety rules for operation and installation.
Guidelines for handling sensitive electronic components.
Rules for ensuring electromagnetic compatibility during installation.
Guidance on using authorized spare parts and accessories.
Instructions for proper product disposal and recycling.
Statement of compliance with EU directives.
Conditions affecting warranty and liability claims.
Information on identifying hardware revisions of modules.
Physical dimensions of system components.
General guidelines and warnings for mounting modules.
Instructions for mounting the DIN rail.
Steps for installing the bus node.
Procedure for installing expansion modules.
Steps for replacing electronic modules.
Guide on installing the bus cover for contact protection.
Instructions for installing the shield bus carrier.
General procedure for module disassembly and exchange.
Detailed steps for replacing the bus node.
Detailed steps for replacing an expansion module.
Steps for disassembling and installing electronic modules.
Procedure for replacing a group of modules.
General warnings and notes for system installation.
Information on using spring terminals for wiring.
Instructions for wiring the bus node.
Instructions for wiring expansion modules.
Instructions for wiring power modules.
Steps for fixing the shield using bus carriers.
Details on fuse protection for power and electronics supply.
Guidance on how to use different power modules.
Features and structure of the 8x24V DC terminal module.
Features and structure of the 8x0V DC terminal module.
Features and structure of the 4x24VDC/4x0VDC terminal module.
Safety guidelines for installing and using power modules.
Features and structure of the 24V DC power module (Art. No. 57130).
Features and structure of the 24VDC+5VDC/2A power module (Art. No. 57131).
List of available accessories for the system.
Definitions of technical terms used in the manual.
Disclaimer, copyright, and usage rights information.
To Next Page
