MUTHIANI SECURITY SYSTEMS VT1000 - Enable Impact Alarm Function; Two Way Communication Function; SD Card; 9 VT1000 Packing and Accessories

User Manual of VT1000
- 23 -
seconds.
8.7 Enable Impact Alarm Function:
SMS command: W<password>,028.1
Meaning: If the vehicle impact, an alarm SMS will send to your phone to warn you
Disable Impact alarm function:
SMS command: w<password>,028,0
When sending out impact alarm, alarm data will be sent to platform, alarm code is 0x14
System’s default setting is disable function of impact alarm
8.8 Two way communication Function:
SMS Command: W<password>,050,AB
A=1, means open auto-answer function; A=0, means the function is close; the system’s
default is A=0
B=1, means Open the horn sound, B=0, means the horn sound is close, the system’s
default is B=0
For example:
SMS send: W000000,050,11
Meaning: Two way communication function is open.
8.9 SD Card
It use to store pictures, max 64G, can store more than 800,0000 pictures.
When snap picture one time, it will store on SD card, it also upload the picture to platform at
the same time.
Note: More SMS Commands, please check Appendix 2: Command List
9. VT1000 Packing and Accessories
Accessories QTY IMAGE FUNCTION
Main unit 1 piece VT1000’s function
GSM Antenna 1 piece Receiving GSM
network signal
GPS Antenna 1 piece Receiving satellite
locating signal data