User Manual of VT1000
- 27 -
SOS Button/IN1 To customize the reply SMS text when SOS Button/Input1 triggered
Button B/IN2 To customize the reply SMS text when Button B/Input 2 triggered
Button C/IN3 To customize the reply SMS text when Button C/Input 3 triggered
Call for SMS Tick it to reply SMS when calling in
Cut off Power Tick it to send alert when the external power be cut off
Appendix 2: Command List
Description Command Remarks
Get current location W******,000 Get current location of VT1000
Get location in
Google map URL
format via SMS
W******,100 http://maps.google.com/map
s?f=q&hl=en&q=22.542563
,114.077971&ie=UTF8&z=
16&iwloc=addr&om=1
Change user’s
password
W******,001,###### ****** is old password
###### is new password
Set interval for
automatic timed
reports
W******,002,XXX XXX is the interval in minute. If
XXX=000 it will stop tracking
Set preset phone
number
for SOS button
W******,003,F,P,T1,T2
F=0, to disable this function;
F=1, only sending SMS;
F=2, only calling preset phone number;
F=3, both SMS and calling (default)
P is the button number and should be 1,or 2,
or 3.
If SOS button is linked to IN1, then P=1.
T: Preset phone number
(T must be less than 16 digits)
T1: When no T2, T1 for short message
number or dial the number; when have T2, T1
for message number.
To Next Page
Loading...