MUTHIANI SECURITY SYSTEMS VT1000 - Page 9

User Manual of VT1000
- 9 -
4. Click Start button to open the COM port,
5. Turn on VT1000 and it will connect with the Editor automatic, As soon as they connect
successful, all the buttons are availability and the status bar will clue on’ Tracker Connect!’ , first
click “Read” to read the tracker’s parameter, when all the parameter read out, you can write the
parameter you need.
Note: “Read” button: when you click the Read button, it means Read the parameters of the tracker.
“Write” button: when you write the parameters to the Parameter Editor, then click the Write
button, the parameters will write into the tracker.