PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
Figure 8. Chef mode screen
In user programs, it is possible to change any cooking parameters (temperature, humidity,
time, cooking mode, etc.). To do this, you must select the button corresponding to the
parameter to be modified and adjust the parameter value.
There are several safety measures that prevent abnormal operation of the equipment, of
which the user must be aware during use.
In case of any error, the unit will stop and display the error code (see chapter 7.8.17).
The oven will not operate if the door is open.
To Next Page
Loading...
