PRODUCT MANUAL iCOOK - DT.MP.IC.2201.2
Figure 12. Open door and load trays warning
When you open the door and load the oven, cooking starts automatically.
To avoid excessive overheating, this state is maintained for a maximum of ten minutes.
Temperature cooking and core probe
The core probe-controlled temperature control mode ends cooking when the temperature
in the food core is equal to the selected temperature. The chamber temperature is kept
constant and equal to the selected temperature value.
To use this mode, we choose a chamber temperature and a desired temperature at the
heart of the food by pressing the TEMPERATURE and PROBE buttons respectively and
adjusting them. Pressing the circular button START/STOP button will start the oven to warm
up and stop when the core probe temperature is equal to the probe set point temperature.
To Next Page
Loading...
